Hyper Sport Works I Frames feature a unitized grip/solenoid housing, funky styling, fully polished bodies, a FULLY adjustable double or single trigger (pre and post travel are adjustable with the frame ON the gun) with no side to side play, and better marker balance due to the grip being moved forward a full inch. Note that the grip only has moved, not the solenoid housing, so all your vertical reg and fore grip mounts will work just fine. They weigh a little less than the two separate stock parts do together plus they are 1/2 an inch shorter overall making your Imp not only shorter front to back, but shorter top to bottom! The rounded grip frame is very comfy in your hand. Installing them is even easier than installing the stock frame due to the one piece construction. They work with Semi, Turbo, Vision, "Cricket" and Genesis boards. I Frames are available in polished Black or Silver anodizing, single or double triggers. They do lack the Revolution Mod (inteli-feed) slot however. If you currently use the plug in connector, please make arrangements with us to modify your I Frame! Included in the price is the I Frame, trigger, and instructions. They do not come with rubber grips.
Reviews = P.B. Review / KamWorld
Price - $160.00
I Frame V3 now in prototype! And you thought the regular old I Frame rocked. HA!
Impulse Button Kit: These buttons cover up the extra holes in your older Impulse solenoid tray and in the I Frame. The kit includes the on/off button, the dwell slot covers with the internal buttons, and the two slot covers. We do NOT sell the buttons individually.
Price - $6.00
Kung Fu Grips for I Frames: These grips were made to fit our I Frames. Comfortably grab and run with your marker by the back end. Switch shooting hands quickly without dropping your gun in the middle of a fire fight. Show the competition your KUNG FU! The Kung Fu Grips will also fit the Adrenaline frame, but they WILL NOT fit a stock Impulse frame. Red and Blue are coming soon.
Price - $25.00
Hyper Sport Works HypAir Fore Grip: The air passage inside the fore grip has been split to supply your fire chamber and your solenoid separately. This not only eliminates the Imps infamous bolt stick, it allows you to run at a much lower pressure. There is no tapping of holes involved. We have produced a special air splitter fitting to split the air chambers and feed the solenoid with it's own air supply. All this is done internally so there are no extra hoses hanging on the out side of your Impulse to get shot, come off, or get cruddy. They will also work with the "New" Impulses which lack the air chamber hole on the bottom! You can order black, silver, or nickel (while supplies last). Ninjas like the black one best.
Price - $XXX Currently being re-designed
Blue Light / Cricket / V2 Vision Board Conversions: Convert your older Impulse board to a new push button board. These feature an automatic ball sensor (eye) which you don't have to adjust, push button timing which does not drift, and it CHIRPS! The conversion kit comes with everything you need. You get the new board, updated instructions on its functions and how to install it, the eye cover, and a whole bunch of little bits and pieces. These will convert an older non-vision Imp to a vision Imp or a non Vision blue light board Imp to a Vision blue light board Imp.
Price - $170.00
NEW DeSIGNZ Vision Covers: Add some color to your Vision Impulse. Or just make people think you have a Vision board.
Price $25.00
NEW DeSIGNZ Flaming Vision Covers: Same as above but with FLAMES!
Price $25.00
Eclipse Ball Detents: Made of Stainless Steal and a rubber "prong" for durability. The Eclipse Ball detents work great and last forever.
Price $18.00
NEW DeSIGNZ Impulse Ball Detents: Keep your balls from falling out. Chose between the long (Vision Eye side) or the short (Non Eye side) versions.
Price - $12.00
NEW DeSIGNZ Valve: Here's the little hunk of aluminum and Delrin that has everyone going nuts. The ND Valve drops into your Impy and jacks the fps up instantly as much as 40! That's like a LOT more air efficiency. Lower your air pressure. Shoot more.
Price - $29.95
Evil Impy Valve: A whole new way to run your Ipmy.
Price - $33.00
PMI Evil Back Plug: This plugs up the back of your bolt hole to keep dirt and whatnot out of it.
Price - $24.50
NEW DeSIGNZ Blade Trigger: Full travel adjustment and no side to side wiggle are the main features of this new trigger.
Price $25.00
Eclipse Blade Trigger: A Funky new trigger for your Impulse, adjustable for pre and post travel.
Price $25.00
Smart Grips Get a grip! You know we had to say that right? Seriously, these are really nice comfy rubber grip panels for any 45 style grip frame. They come in red, blue, green, smoke, clear, and black. They also feature jewels in the sides that say either Shocker, Smart Parts, or Freak.
Price - $23.00
Vertical Max Flo Stuff
Voodoo Full Flow Vertical The Voodoo Full Flow Vertical modification allows your Impulse to run at its maximum level of performance. This is a MUST HAVE for every older Impulse out there! A factory fitted internal modification to your Impulse splits the gas supply allowing unrestricted flow to the solenoid and the valve chamber, giving greater consistency and a much smoother operation. The FFV is fully compatible with all standard thread vertical regulators and gas through grips and can be fitted to any Impulse. They come in Black or Silver. You will however have to re tap the #10-32 threaded hole deeper and sink the set screw in farther. We will supply instructions. If you feel this is beyond your abilities, H.S.W. will install the Full Flow at no charge. Shipping and Handling fees however do still apply.
Price - $50.00
NEW DeSIGNZ High Flow Vertical (Straight and 15 Degree) ISO Mod Adapter: Its an adapter so you can mount a ASA gadget grip or vertical reg. to your Impulse. This is referred to as an isolation mod. Why, well it separates the 2 chambers (solenoid & valve) and does not allow the gun to deplete the solenoid air reserve when its needed most, when you fire your marker.
Price - $43.00
NEW DeSIGNZ High Flow Vertical (Straight and 15 Degree) NON ISO Mod Adapter: Its an adapter so you can mount a ASA gadget grip or vertical reg. to your Impulse which does NOT have the taped hole underneath the gun.
Price - $27.00
NEW DeSIGNZ NEW 15 Degree ISO Mod Adapter: Its an adapter so you can mount a ASA gadget grip or vertical reg. to your Impulse. This is for NEW Impulses which do not have the small taped hole underneath the gun. It runs the solenoid air in through the front of the gun on a tape worm sort of arrangement.
Price - $45.00
Bolt Stuff
Team Strange Bolt: Made from white delrin, this is a minimalists bolt. This is the bolt Pro NPPL Team Strange uses on tier Team Strange Impulses.
Price - $40.00
NEW DeSIGNZ "Equalizer" Pro Delrin Bolt:Efficiency increases up to 36. This does vary from gun to gun. ND claims actual field tests show an increase in velocity of 12-30 FPS over stock with some nearing 30+ FPS during initial HPA tests. The Delrin bolts do not wear the Impulse body like the stock aluminum bolt. Some surfaces on the bolt are slightly smaller to decrease even more friction. Look closely at pic. The stock series Delrin bolt weighs only 29.5gr. considerably less than the aluminum one at 54.6gr. allowing faster cycling due to less inertia. Comes in stock, flush, and 5 inch lengths.
Price - $33.00
Voodoo Delrin Impulse Bolt The Voodoo Impulse Bolt oozes class. Currently available in Black Delrin, the need to constantly lubricate your bolt is now eliminated due to the complete lack of o-rings. The lightweight construction and low friction content of the Voodoo Impulse Bolt dramatically reduces any 'kick' when you fire your gun. Comes as standard on the Voodoo Impulse. Works fine with the stock pin in your Shocker.
Price - $36.00
Remember, click the Shopping Cart button to the left to see what you have selected so far.
PMI Evil Bolt: PMI's new Evil Delrin Bolt for Impulses.
Price - $39.00
Bolt Pins
HSW Delrin Bolt Pin: An all delrin bolt pin. It's super light and reduces friction between the pin and the slot in the body allowing faster rates of fire.
Price - $25.00
Team Strange Titanium Bolt Pin: All the Strange, half the weight.
Price - $30.00
Voodoo Bolt Pins This two-piece bolt pin adds the finishing touch to any Impulse. Available in the 5 standard colors, Blue, Silver, Green, Red and Purple. Pick a colors to suit your mood. Featured as standard on the Voodoo Impulse.
Price - $25.00
NEW DeSIGNZ Titanium Bolt Pins: Titanium bolts pins are almost half the weight of the stock pins. These pins weigh only 6.8gr versus 13.1gr of the stock stainless steel one.
Price - $17.00
LPR Stuff
Smart Parts Mini Max Flo LPR : It's a little tiny Max Flo. As you can see in the picture, it's quite a bit smaller than the ANS style LPR. Using this LPR gives you the ability to separate the solenoid pressure from your firing pressure. The results are a big increase in gas efficiency and no more bolt stutter. Order a tape worm and LPR Spring Cap or a whole NDZ LPR Kit, below.
Price - $80.00
NDZ Impulse LPR/ANS Ultimate Combo: ANS is the hot setup for LPR seekers. We use the NEW high flow ANS regs that can support 18-20 balls a second air flow. These kits come complete as shown and are 99% pre-assembled right out of the box for an easy no hassle installation.
Price - $100.00
Autococker ANS Jackhammer II Regulator Knobs: The Rock reg has many knob options, try finding something for the ANS Jackhammer or Trinity Regs. Customize even more for great looks while loosing some excess dead weight. *NEW, w/tourney lock.
Price - $14.00
Price - $15.00
PMI Evil Respirator Kit: PMI's new "LPR" Kit is a sleek as it gets. No more external hoses and big bulky LPR sticking out the front of your Impy. It's all housed inside the Respirator Kit.
Price - $100.00
Spring Cap Stuff
Impulse High Volume Valve Caps:These volumizers hold 19.6cc versus the stock capacity of only 9.6cc. Testing shows velocity increases. Users of HPA can see a 15-25fps increase. Co2 results are less. PLus they are a lot lighter than the stock cap! We have in stock the smooth style only right now. If you want the 3 or 5 rib please give us call!
Price - $27.00
Impulse High Volume LPR Cap Kits: Same great performance as the caps above, but with an LPR hole out front, and a tape worm arrangement. GREAT for running an LPR in your Impy!
Price - $39.00
Voodoo Spring Cap The hard-lined Spear Voodoo Spring Cap comes in two colors, silver and black. The Spear cap utilizes the existing valve spring. Choose one for your Impulse today.
Price - $38.00
Feed Tube Stuff
A Plus Ultra Low Rise Locking feed tubes: It's a long name for a product long on features. This feed tube is very low, has a screw down collar that locks your hopper in place, and there are only two parts to it.
Price - 45.00
NEW DeSIGNZ Low Rise Universal Feed Tube: Made for Revys and all similar hoppers.Vision system recomended!
Price - $23.00
NEW DeSIGNZ NO Rise Feed Tune for HALOs: As low as you can get. This feed tube is made for Halo hoppers. Vision system recomended!
Price - $21.00
Voodoo Impulse Low Rise Feed Tube The low-rise Feed Tube dramatically reduces the overall height of your marker. Ideal for front players who want to stay as tight as possible while eliminating their opponents.
Price - $25.00
Twister Feed Tube: An adjustable feed tube to securely hold your hopper on. Just put your hopper on, twist the neck down tight, and go play. And yes, they work GREAT! They can be had in either high rise, low rise, or no rise lengths. We suggest only using the short ones on Impulses with the Vision system.
Price - $37.00
Hammer and Ram Stuff
NEW DeSIGNZ Ram Housing Assembly: Impulse high efficiency performance ram housing. This piece gets rid of even more wasted volume. This alone will add many more shots per tank (100-200) while again adding the pure custom look. Plus NDZ's Slik Shot Ram, special Hammer Cap, AND a weight balanced Hammer! This one piece does it all.
Price - $89.00
NEW DeSIGNZ Hammer Ram Housing: Impulse high efficiency or (HE) performance ram housing. This piece gets rid of even more wasted volume, here's how. The area around the milled air path has been made larger to take up the wasted volume. So now when you fire your Impulse the air gets right to work, moving the ram shaft forward. The area around the stock ram housing has to get filled first before the ram will move. This alone will add many more shots per tank (100-200) while again adding the pure custom look.
Price - $40.00
NEW DeSIGNZ Hammer: The choice of weight is yours. The brass is heavier over the stainless steel version. The mid weight is just that, right in the middle. Testing shows that a heavier hammer does increases velocity. With the increase in velocity you can lower your input pressure/ dwell. Stainless steel is more durable.
Stock Alum. 15.9gr
Brass (left) 48gr
SST (middle) Reg. 44.1gr
SST Mid. (right) 29.8gr
Price - $16.00
New DeSIGNZ Hammer Tool: Use this tool to make replacing your hammer a breeze.
Price - $20.00
NEW DeSIGNZ "Slik Shot" Hammer Shaft: These shafts have a special molecular bonded coating which decrease the coefficient of drag to .03 The coating will not rub off. Also, the back of the shaft has been extended to increase overall efficiency.
Price - $24.00
NEW DeSIGNZ Hammer Cap: According to NEW DeSIGNZ tests show that the solid hammer caps increase your velocity as well as cycling the marker faster, and its noticeable.. HPA users can see a 14-25fps increase while co2 users normally see about 3-7fps.
Price - $12.00
No Photo
Dow Corning #33 Grease: Smart Parts recommended lube for your Impulse. Enough to last a life time! (Life Time is dependent on age, condition, genetics, and personal habits. No Life time guarantees unless you are a fruit fly.)
5.3 oz tube Price - $30.00
